Introduction
What is Aluminum Taken?
Aluminum tank is a fuel or water storage tank made using aluminum metal. This type of tank, due to its light weight, high corrosion resistance and longevity, is an ideal replacement for older metal tanks, including steel tanks.
The role of aluminum tank in truck and trailer
Aluminum Tucking Benefits in Yazd
1) Weight Loss and Increased Capacity Capacity
One of the most important benefits of aluminum tackling is its lightness. Aluminum is much less weight than steel. This directly reduces the overall weight of the truck or trailer and increase cargo capacity.
1) Increased Corrosion Resistance
Fuel and water may make the tank rust and decay; But aluminum, because of its stainlessness, enhances the shelf life of the tank and makes it easier to maintain.
1) Savings in Maintenance Cost
The cost of maintaining and maintaining aluminum tank is much lower than steel tanks. This will be the subject of the long -term for heavy -duty car owners.
1) High Customization and Flexibility Ability
Aluminum tackling allows the customer to design and produce according to the required car space and volume.
1) Beauty and Best Earning
Aluminum tank with a glossy look adds to the beauty of the truck and trailer and increases the value of the car.
Aluminum Tank Production Processes in Yazd Initiative Taken
Step One: Review of Specialized Requirements and Advice
In the Yazd Initiative Tucking Factory, the customer needs are first carefully reviewed. The accurate measurement of the installation location, the volume of the tank and the type of vehicle are performed.
Step Two: Design and Selection of the Suitable Alloy
Initiative tank experts use special software to design 3D and precise aluminum tank according to customer needs and choose the best aluminum alloy.
Step Three: Cutting and forming
Aluminum tank production is done with careful cutting of aluminum sheets based on the map and forming it with advanced press machines.
Step Four: Specialized Welding
One of the most sensitive parts of aluminum towering is welding. Aluminum welding is done by argon welding machines to ensure 100 % resistance and sealing.
Step Five: Installation of Connections and Testing Test
After the main body of the aluminum tank, essential connections including fuel door position, inlet and outlet pipes, fuel sensors and safety locks are installed. All tanks are under pressure and leakage testing to ensure their complete health.
Stage 6: Final Coloring or Painting
If the customer's order is stained or polished, the aluminum tank is done by the specialists.
Stage Seven: Final Send and Installation on -site
In the initiative ticking, sending and installing aluminum tanks by the professional installation team is done on the site so that the customer has no concern about installation.
Important Tips in Installing Aluminum Truck and Trailer
- انتخاب نوع آلیاژ آلومینیوم: حتماً از آلیاژهای مقاوم استفاده کنید تا باک عمر طولانیتری داشته باشد.
- نصاب حرفهای: نصب باک آلومینیومی باید حتماً توسط نصاب متخصص انجام شود تا از وقوع هرگونه نشتی یا آسیب به سیستم سوخترسانی جلوگیری شود.
- بررسی اتصالات: بعد از نصب باید تمام اتصالات، لولهها و دریچهها چک شده و تست نشتی انجام شود.
- بهرهگیری از تجهیزات استاندارد: تمام قطعات مورد استفاده باید استاندارد و مقاوم باشند.
- راهنمایی و آموزش به راننده: آموزش صحیح نحوه استفاده و نگهداری باک آلومینیومی پس از نصب اهمیت ویژهای دارد.
why choose the ticking of Yazd's initiative?
1. High experience and experience
Taken Yazd's initiative with years of experience in producing and installing aluminum tanks for trucks, trailers and water tankers has gained a lot of customer confidence.
1. Use the best raw materials
All tanks in this collection are made of the best aluminum alloys that are highly resistant to pressure, impact and corrosion.
1. Experienced and specialist team
The Initiative Tucking Workshop has a team of skilled engineers and technicians that guarantee the best quality at each stage.
1. Quality Guarantee and after -sales service
By purchasing and installing aluminum tanks from the initiative, you will benefit from the quality and after -sales service guarantee.
1. Ability to order and build proprietary tank
In ticking the initiative you will be able to order the tank in the desired dimensions and shape and you will eliminate your need in the best way.
1. Fast and Safe Installation
Permitted, fast, fast -paced installation services are implemented to create the least stop time for the car.
Yazd Initiative Taken Services
- تولید هر نوع باک آلومینیومی بر اساس سفارش مشتری
- توسعه و طراحی باک های صادراتی و سفارشی
- نصب و تعمیر تخصصی باک کامیون، تریلی و تانکر آب
- مشاوره رایگان در انتخاب مناسب ترین نوع باک
- تعمیرات و بازسازی باک های آلومینیومی آسیب دیده
Aluminum truck and trailer tackle is a clever choice for heavy car owners seeking to reduce costs, increase productivity and maintain their car value. Due to Yazd's climatic conditions and the high volume of road transport, it is important to have high quality aluminum tank. Taken Yazd's initiative based on the experience, knowledge and use of modern equipment is ready to serve you. Simply apply to Baksaziebtekar.ir for free advice or product order to ensure the quality, speed and warranty of our services.